4WD Solutions supply and fit ARB Protection Bars

Want to know what to look for in a Bull Bar?   Click here to find out 
ARB's bars are superbly engineered and manufactured not only to maintain maximum functionality, but also to ensure they complement the look of the vehicle.  ARB manufactures a number of different bars from the new modern design of the Summit Bar, sleek popular Deluxe and Sahara styles, to the more functional Commercial Bar, as well as Nudge Bars for smaller SUVs and utes.

 Click on the following options.....
ARB SUMMIT BAR   ARB ALLOY BAR   ARB DELUXE BAR   ARB COMMERCIAL BAR   ARB SAHARA BAR   ARB SMART BAR


NEW ARB SUMMIT BAR

The all new Summit bar range is a modern interpretation of the renowned ARB Deluxe bar, styled to complement modern double cab and wagon vehicles through a fresh, contemporary design language. The Summit bar incorporates unique design features such as a 30mm edge radius on the wings and centre pan, wider press formed cover straps, 60.3mm top tubing, two piece polyethylene buffers and redesigned fog light surrounds. This results in the most visually impressive frontal protection system on the market.
  • Larger Tubing
    60.3mm mandrel steel tubing provides increased frontal protection, as well offering greater visual styling to modern four wheel drive vehicles.
  • Winch Compatible
    Mounting a winch to a vehicle requires a properly supported structure that is designed to accommodate the stresses of winching. When using a snatch block to increase winching capacity, the forces are multiplied to several times the rated capacity of the winch. The ARB Summit bar features the option of fitting a winch, and is designed and tested to endure and exceed such loads
  • Wider Edge Radius
    A 30mm wing and centre section edge radius offers increased strength while complementing the vehicle.
  • Driving Light Provision
    Exceptionally durable and secure, all ARB bars serve as an ideal platform to mount driving lights, helping ensure maximum performance and longevity. Driving lights mounted to a high quality bull bar prevents problems such as excessive movement, a vibrating beam pattern, premature bulb failure and eventual fatiguing of the light bodies.
  • Split Pan Design
    The wide, split pan design enhances the strength of the bar, while providing the radiator and engine with a massive amount of air flow. An integrated winch clutch opening makes winch operation simple
  • Air Bag Compatible
    With an air bag equipped vehicle, it is essential that the vehicle's crush rate and air bag triggering are not altered when a bull bar is installed. ARB assesses each vehicle's frontal crush characteristics and replicates the crush rate into the design of each air bag compatible bull bar and its steel mounting system. This achieves maximum possible vehicle and passenger protection without affecting the crash pulse.
  • Steel Uprights
    Each bull bar upright is cut from a single sheet of steel and extends from the top tube through to the bumper section and actually forms part of the bar to chassis mount. This process ensures the whole outer frame receives the maximum possible support. Wide, press formed cover straps are then welded onto each upright to ensure there are no exposed sharp edges.

ARB ALLOY BAR

ARB’s all new Alloy bar is providing owners with a greater choice of frontal protection options for their vehicle. With styling cues designed to complement modern four wheel drive models, the Alloy bar sets the standard in protection and functionality.

The Alloy bar utilises ARB’s renowned manufacturing processes throughout, ensuring maximum strength and the highest level of aesthetic finish. Press forming further exemplifies this attention to detail, with smooth edges resulting in a bull bar that integrates with the vehicle flawlessly.

An optional winch provision allows the Alloy bar to accommodate a range of winches up to 10,000lbs.


ARB DELUXE BAR

The ARB Deluxe Bull Bar selection is the most extensive, with bull bar and winch bar options available for most vehicle types.
  • Five fold upswept and tapered wing design for optimum strength and approach angle.
  • Recessed indicators for protection against road debris that could damage them.
  • Steel uprights support outer frame and are finished with cover straps to ensure there are no exposed sharp edges.
  • Most ARB bull bars include two CB aerial brackets welded behind the top cross tube.
  • Secure mounting points ideal for IPF driving lights. 
  • Mounting system specifically engineered for each vehicle to ensure it functions properly in extreme circumstances.
  • Some designs feature Hi-Lift jacking points, allowing a Hi-Lift jack to be mounted directly on the bar.
  • The properly supported structure of winch bull bars is designed to accommodate the stresses of winching.
  • Split pan design provides increased strength and airflow to the engine.
    Please note: certain models may not incorporate all of the specific features.

ARB COMMERCIAL BAR
If you are looking for a cost effective bull and winch bar solution, and are prepared to give up some of the aesthetic characteristics of the Delux Bar, then the ARB Commercial Bar is right for you. By simplifying manufacturing processes, such as the elimination of weld grinding and urethane buffers, ARB can supply a strong and functional commercial bar at a cost effective price.

  • Five fold upswept and tapered wing design for optimum strength and approach angle.
  • Split pan design provides increased strength and airflow to the engine.
  • 76.1mm steel centre frame tube and 47.6mm outer frame tube for added strength.
  • High tensile bolts securely fasten the mounting system to the chassis.
  • Secure mounting points ideal for IPF driving lights.
  • Recessed indicators for protection against road debris.
  • Some commercial bars are available with electric winch provision, and have been specifically
    designed to accommodate the stresses of winching.
  • Some ARB commercial bars incorporate CB aerial brackets welded behind the top cross tube.
  • Some commercial bars feature Hi-Lift jacking points, allowing a Hi-Lift jack to be
    mounted directly on the bar

ARB SAHARA BAR

The ARB Sahara Bar is one of the most technically advanced and innovative protection systems available.
  • Five fold upswept and tapered wing design for optimum strength 
    and approach angle.
  • Polished 76mm centre tube.
  • Split pan design provides increased strength and airflow to the engine.
  • Specifically engineered, air bag compatible mounting system.
  • Automotive grade polyurethane buffers.
  • Incorporates provision for winching and is designed to accommodate the 
    stresses of winching.
  • Secure mounting points for IPF driving lights and CB antennas.
  • Recessed fog lights (optional).
  • Finished in a durable grey powder coat with optional 
    colour coding available.

ARB SMART BAR

Manufactured from polyethylene plastic, and popular with fleet and emergency service operators including ambulance, police and fire services, the innovative SmartBar frontal protection system provides an alternative for organisations and customers looking for a lighter option rather than the traditional steel bull bars.

ARB SmartBars are air bag compatible and retain many practical features such as winch compatibility (certain models), mounting provision for driving lights and UHF antennas, and durable LED parker/indicator lights.

SmartBars are environmentally friendly, easy to install and are compatible with original vehicle fog lamps.